Simple Steps to Installing Ceramic Tile Flooring
Posted by Tousala | Posted in General Interest | Posted on 03-12-2009
0
Looking it things from a purely design standpoint, if you want to bring a new look to a room, install a new floor. But should you choose bamboo laminate flooring, quality vinyl plank flooring, or even carpeting?
When homeowners are deciding on a type of tile to use in their rooms, one of the primary types of flooring that people choose is ceramic tile. Ceramic tile is so popular because of its versatility. It’s attractive, it’s durable. And, it lasts a long time.
The most important part of installing a ceramic tile floor is preparing it for the tile. The first step towards a perfect installation is to start with a clean, flat floor. That means removing all carpeting, old tile, nails, and so on. If the floor is unlevel, you should take steps to level it. If necessary, you may have to lay a sub-flooring over the existing floor in order to get a nice flat surface.
When the sub-flooring has been prepared, the next step is to choose your starting point.
A professional will normally choose to lay tile starting at the center of the area and move outwards from there. The center of the room is the focal point for people entering it and you want to make sure that you get that right.
When you have found the center, you simply snap chalk lines to help guide yourself in the laying of the first tiles. At this point, the most difficult part of your task is done.
From here on out you will be mainly mixing the tile adhesive, applying it to the back of tiles, and laying it on the floor – moving outwards from the center of the room towards the wall. It may be necessary to cut tile pieces as you near the wall or corners.
When the tile adhesive is dry, apply grout to fill in the joints. Finally wipe the grout residue.
For more info on buying and installing pergo flooring visit our site.

